Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat transfer in solids: Input parameters
Posted 07.09.2015, 19:58 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hi to all,
I am simulating the heat conduction in solids in the steady state condition (with Comsol 4.3)
In this case the equation implemented is the one that I attached.
My question is:
why in this condition does COMSOL ask as input parameter also the spaecific heat Cp and the density of the materials?
I would not need them to solve the equation.
Thank you
I am simulating the heat conduction in solids in the steady state condition (with Comsol 4.3)
In this case the equation implemented is the one that I attached.
My question is:
why in this condition does COMSOL ask as input parameter also the spaecific heat Cp and the density of the materials?
I would not need them to solve the equation.
Thank you
Attachments:
1 Reply Last Post 09.09.2015, 07:51 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
it's true that COMSOL often ask for slightly more material data that what one could expect, when one is performing stationary solver models. But at the moment you introduce a time solver the density and the heat capacity are mandatory, and that is why, COMSOL is considerening the full t,x,y,z equation of heat transfer for the material data demand, and not your limited stationary case with t=0
You can try with 1,1 as input or true data you should see no difference, in stationary, try it out :)
--
Good luck
Ivar
it's true that COMSOL often ask for slightly more material data that what one could expect, when one is performing stationary solver models. But at the moment you introduce a time solver the density and the heat capacity are mandatory, and that is why, COMSOL is considerening the full t,x,y,z equation of heat transfer for the material data demand, and not your limited stationary case with t=0
You can try with 1,1 as input or true data you should see no difference, in stationary, try it out :)
--
Good luck
Ivar