Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

nonlinear B-H curve

Posted 20.09.2014, 15:15 GMT-4 Low-Frequency Electromagnetics Version 4.4 2 Replies

David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi

I am looking for an example of a very simple model:

I have a permanent magnet near a pirce of iron (non linear B-H) and need

to calculate the force on the iron.

None of the model examples cover this particular case.

thanks

DAvid
2 Replies Last Post 30.09.2014, 09:42 GMT-4
Vivekram Sivasailam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21.09.2014, 05:42 GMT-4
Hi,

You can calculate the force using the in-built force functions or maxwell stress tensors inside COMSOL. Alternatively there is a speaker module inside the model libraries for acoustics speakers. You could check that too.

Viv
Hi, You can calculate the force using the in-built force functions or maxwell stress tensors inside COMSOL. Alternatively there is a speaker module inside the model libraries for acoustics speakers. You could check that too. Viv
Nirmal Paudel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30.09.2014, 09:42 GMT-4
Dear David,

You can use the non-linear Magnetic Materials (B-H Curve) instead of a linear Iron as done in the attached model file. The attached model file is the modification of the Permanent Magnet model from the model library:
www.comsol.com/model/the-magnetic-field-from-a-permanent-magnet-78

Best Regards,
Nirmal Paudel
-----------------------
COMSOL Employee
USA
Dear David, You can use the non-linear Magnetic Materials (B-H Curve) instead of a linear Iron as done in the attached model file. The attached model file is the modification of the Permanent Magnet model from the model library: http://www.comsol.com/model/the-magnetic-field-from-a-permanent-magnet-78 Best Regards, Nirmal Paudel ----------------------- COMSOL Employee USA

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content