Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simple Acoustic
Posted 15.05.2012, 05:53 GMT-4 Acoustics & Vibrations Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am trying to model a 2D acoustic time harmonic square (10x10[m]; left bottom corner at (0,0)).
At the top the pressure is 101325[Pa] and now I just wanted to get started with the gravity force as a kind of a load, but how can I implementate it to get a continous rise of the pressure?
The 2nd step should be to create a point-source which is located at (0,0). But this is as well unknown for me yet.
Thanks for any hints on this.
Nikolaus
I am trying to model a 2D acoustic time harmonic square (10x10[m]; left bottom corner at (0,0)).
At the top the pressure is 101325[Pa] and now I just wanted to get started with the gravity force as a kind of a load, but how can I implementate it to get a continous rise of the pressure?
The 2nd step should be to create a point-source which is located at (0,0). But this is as well unknown for me yet.
Thanks for any hints on this.
Nikolaus
1 Reply Last Post 15.05.2012, 06:49 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
cant you load the system with a stationary solver case (before your time harmonic) and add a body force
Fz = -g_const*rho
And use the results of the stationary case as initial condition for the time harmonic ?
As I do not have Acoustic module I do not know if the bnody load is already in there, else you need to add a solid/structural physics, or find a coupled one
--
Good luck
Ivar
cant you load the system with a stationary solver case (before your time harmonic) and add a body force
Fz = -g_const*rho
And use the results of the stationary case as initial condition for the time harmonic ?
As I do not have Acoustic module I do not know if the bnody load is already in there, else you need to add a solid/structural physics, or find a coupled one
--
Good luck
Ivar