Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mesh subdomains separatedly
Posted 09.09.2010, 03:43 GMT-4 3 Replies
Please login with a confirmed email address before reporting spam
Hi, I have imported a geometry from Solid works, and I have around 20 subdomains. The liquid passes through around 6 subdomains, the rest are impermeable (there is no mass transfer, but there is reaction and electronic transfer, but at the beginning, for simplicity, I only want to simulate the liquid movement, without taking into account the rest of the geometry.
For meshing, there is an error (Error 4130) which says that "impossible to respect geometry edge" In subdomain 2 and sometimes subdomain 3.
I would like to mesh each subdomain separatedly, but when I go to window "Free mesh parameters", and inside to "Subdomains" and select the subdomains, I specify the mesh parameters and Remesh, and all geometry is remeshed. I do not know how to remesh ONLY the subdomains selected.
Could anyone please help me?
Thank you.
For meshing, there is an error (Error 4130) which says that "impossible to respect geometry edge" In subdomain 2 and sometimes subdomain 3.
I would like to mesh each subdomain separatedly, but when I go to window "Free mesh parameters", and inside to "Subdomains" and select the subdomains, I specify the mesh parameters and Remesh, and all geometry is remeshed. I do not know how to remesh ONLY the subdomains selected.
Could anyone please help me?
Thank you.
3 Replies Last Post 10.09.2010, 04:54 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
Have you tried to use the button "Mesh Selected" instead of "Remesh". I think it should solve your problem.
Have a nice day,
Alois
Have you tried to use the button "Mesh Selected" instead of "Remesh". I think it should solve your problem.
Have a nice day,
Alois
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I did it in a different way, from the Interactive Meshing --> Mesh selected, which is the same; your option is shorter one.
Thank you !
Thank you !
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
in V4 you should mesh in steps by selecting the items by groups depending on their position and shapes, and adapt the "size" and or mesh type/structure per group.
Global automatic meshing of many doamins often leads to meshin errors like that
--
Good luck
Ivar
in V4 you should mesh in steps by selecting the items by groups depending on their position and shapes, and adapt the "size" and or mesh type/structure per group.
Global automatic meshing of many doamins often leads to meshin errors like that
--
Good luck
Ivar