Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Restore model

Posted 10.09.2015, 09:40 GMT-4 Interfacing, Geometry, Installation & License Management, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.4 1 Reply

Syed Zaid Ali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

My computer shut down itself and I had not saved changes to my model. Could anybody guide me how can I restore my unsaved model?

Appreciate the help

Thank you

Best regards
1 Reply Last Post 10.09.2015, 11:59 GMT-4
Sepideh Ramezani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 10.09.2015, 11:59 GMT-4
Problem Description
This knowledgebase describes how to benefit from the recovery feature in COMSOL 4.1 and later. This is particularly useful if you have a long computation that for some reason was interrupted at some point, maybe due to system instability, or a network problem or power outage.

Solution
You can retrieve data that might have been saved by the automatic recovery feature.

Select File > Open Recovery File and open the file with correct date.
Save the file as a new file.
In the new file, you should be able to right-click Study and select Continue instead of Compute in
order to continue the solution process.


www.comsol.com/support/knowledgebase/1112/

Good luck!
Problem Description This knowledgebase describes how to benefit from the recovery feature in COMSOL 4.1 and later. This is particularly useful if you have a long computation that for some reason was interrupted at some point, maybe due to system instability, or a network problem or power outage. Solution You can retrieve data that might have been saved by the automatic recovery feature. Select File > Open Recovery File and open the file with correct date. Save the file as a new file. In the new file, you should be able to right-click Study and select Continue instead of Compute in order to continue the solution process. http://www.comsol.com/support/knowledgebase/1112/ Good luck!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content