Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
plot 3d surface image
Posted 22.08.2015, 16:40 GMT-4 RF & Microwave Engineering Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Dear all,
I have built an 3d RF geometry and excited it with light. By plotting the electric field surface on this geometry, I want to display the surface without built-in electric field applied on the air. I should make transparent this boundaries. Which toolbar and properties should be configured?
Thank you very much in advance,
I have built an 3d RF geometry and excited it with light. By plotting the electric field surface on this geometry, I want to display the surface without built-in electric field applied on the air. I should make transparent this boundaries. Which toolbar and properties should be configured?
Thank you very much in advance,
1 Reply Last Post 23.08.2015, 05:16 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Dear all,
I have found some useful materials in The Comsol Blog
www.comsol.com/blogs/the-graphics-window-effective-beautiful-postprocessing/
www.comsol.com/blogs/surface-volume-line-plots-visualizing-results-heat-sink/
If you need to plot your results without some boundaries,edges or domains, this will help you
I have found some useful materials in The Comsol Blog
www.comsol.com/blogs/the-graphics-window-effective-beautiful-postprocessing/
www.comsol.com/blogs/surface-volume-line-plots-visualizing-results-heat-sink/
If you need to plot your results without some boundaries,edges or domains, this will help you