Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mesh size component
Posted 18.08.2015, 21:22 GMT-4 Version 4.4 2 Replies
Please login with a confirmed email address before reporting spam
Hi All,
I am wondering if there is a way to find max and min mesh size in the direction of x, y and z axis? I need it to compare my model with a published paper. I understand h is the variable for mesh size, but it does not have component in a specific direction.
I am wondering if there is a way to find max and min mesh size in the direction of x, y and z axis? I need it to compare my model with a published paper. I understand h is the variable for mesh size, but it does not have component in a specific direction.
2 Replies Last Post 24.08.2015, 05:46 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
I end up export the mesh and calculate element size by Matlab. =]
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
I find your arguments interesting and that you should push them to "support" that feature might appear in a future release
But have you tried to select an Edge and asked for the Derived Values of "min", "max" and "average" over the edge of the value of "h" ? this should give you a good clue valid OK only along the line
--
Good luck
Ivar
I find your arguments interesting and that you should push them to "support" that feature might appear in a future release
But have you tried to select an Edge and asked for the Derived Values of "min", "max" and "average" over the edge of the value of "h" ? this should give you a good clue valid OK only along the line
--
Good luck
Ivar