Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
overlapping of two domains
Posted 22.07.2015, 07:33 GMT-4 Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
I extruded an object to a distance of 0.2 microns. However when I add a block below it of height 1 microns I found that the two domains overlap each other. I want a structure such that the extruded object is on top of the block placed below it.I described the z-axis of the block below it to be -1 micron.Where am I doing the mistake?...please help
1 Reply Last Post 23.07.2015, 02:17 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
it's easier for us to understand if you provide a model file. one item could be the geometrical resolution you have by default that is not fine enough, depends on your model setting
--
Good luck
Ivar
it's easier for us to understand if you provide a model file. one item could be the geometrical resolution you have by default that is not fine enough, depends on your model setting
--
Good luck
Ivar