Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Magnetization problem

Posted 09.07.2015, 13:27 GMT-4 Low-Frequency Electromagnetics Version 5.1 4 Replies

gerardm
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
I am working on an electromagnetic problem. I am trying to simulate a multi-material (2 different materials) piece under the influence of a magnetic field generated by a coil.
For the sake of simplicity, I have just plotted the piece of interest and an external cylindric boundary (which represents the air inside the coil that is surrounding the piece of interest) and I am applying a magnetic field to the whole system.

I am trying to show the magnetization of both materials (defined according to their permeability values), but I cannot manage to depict values for air.

Does anyone have any tips?
Regards,
g.
4 Replies Last Post 12.08.2015, 10:28 GMT-4
AC
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 09.07.2015, 14:51 GMT-4
you can probably use infinite element domains which extends the region outside your model to infinity.
Without the actual model, it is hard to suggest any alternatives.
you can probably use infinite element domains which extends the region outside your model to infinity. Without the actual model, it is hard to suggest any alternatives.
Anna Maria Białostocka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 28.07.2015, 11:02 GMT-4
Hi,
Very important are parameters of the materials and the mesh. What parameters and values of them did You put into model. Mesh should be regular. I'm working with almost the same problem. Could You send me the model? I'm working on version 4.3 and 5.1.
Anna
Hi, Very important are parameters of the materials and the mesh. What parameters and values of them did You put into model. Mesh should be regular. I'm working with almost the same problem. Could You send me the model? I'm working on version 4.3 and 5.1. Anna
He YeMa
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 29.07.2015, 20:48 GMT-4
My model : the part of core apply BH curve, I feel COMSOL calculate such problems are difficult,could you provide me some advises for the problems
My model : the part of core apply BH curve, I feel COMSOL calculate such problems are difficult,could you provide me some advises for the problems
Nirmal Paudel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 12.08.2015, 10:28 GMT-4
Hi,

To solve a non-linear time dependent problems like this, we do recommend that you modify the Time Dependent solver as suggested in this Knowledge Based Entry:

www.comsol.com/support/knowledgebase/1127/

Best Regards,
Nirmal Paudel
Hi, To solve a non-linear time dependent problems like this, we do recommend that you modify the Time Dependent solver as suggested in this Knowledge Based Entry: http://www.comsol.com/support/knowledgebase/1127/ Best Regards, Nirmal Paudel

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content