Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using variable previously computed for next simulation

Posted 27.07.2010, 12:28 GMT-4 1 Reply

Luca Belsito
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am having several difficulties trying to solve a multiphysics problem in the time domain. I have a Heat transfer model coupled with Mechanical and acoustic. At the beginnings I solve the Heat equation and then use the solution for the other two equations, but I get the error" Failed to find consistent initial values". Usually I manage to solve this kind of problem solving the static equations and using the result as initial condition. Unfortunately, in this new simulation, i wanna use the temperature solution of Thermal model found in the previous step and so I don't manage to use the static solution as initial condition. How can I solve this problem? Many thanks

Best regards
Luca Belsito
1 Reply Last Post 28.07.2010, 04:10 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.07.2010, 04:10 GMT-4
Hi

if you use the segregated solver, does this not solve the issue ? or by plying with the store solution use initial conditions from stored ?

--
Good luck
Ivar
Hi if you use the segregated solver, does this not solve the issue ? or by plying with the store solution use initial conditions from stored ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content