Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to create this geometry
Posted 25.04.2015, 10:26 GMT-4 Fluid & Heat Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
please help me to create the geometry of diffuser in 2d. i have attached the image
Attachments:
1 Reply Last Post 25.04.2015, 13:01 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
I'd lay it out as a polygon with all sharp corners then apply a "fillet" of the specified radius to the two rounded corners.
My first guess was to use a combination of squares and triangles but then it doesn't put a defined point at the rounded corner until after the union operation and the fillet needs to go before that, so best to use a polygon for the full thing, I think. But for the rounding fillet is easiest. The alternative would be boolean operations involving circles and squares but that involves trig and is more complicated.
My first guess was to use a combination of squares and triangles but then it doesn't put a defined point at the rounded corner until after the union operation and the fillet needs to go before that, so best to use a polygon for the full thing, I think. But for the rounding fillet is easiest. The alternative would be boolean operations involving circles and squares but that involves trig and is more complicated.