Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pre-stressed analysis with several loads

Posted 26.09.2014, 10:26 GMT-4 Structural Mechanics Version 4.3a 0 Replies

Jyani Vaddi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am modeling vibrations of a beam first preloaded in a four point bending configuration. The set up is as follows: The bar is first loaded in a four point bending load (static load). A shaker is attached at the center of the deformed bar and generates vibrations (Harmonic perturbation load). So, there are a total of two different loads on the bar. The static load for predeformation and the harmonic perturbation load at the center of the prestressed bar.

I am running a pre-stressed frequency analysis. The issue I am running into is that with the current configuration, the pre-deformation does not seem to change the resonance frequency of the bar at all. However, I noticed that, instead of a separate load at the center, if I apply the harmonic perturbation as well at the point where I applied the static force, the preload seems to affect the vibration and change the resonance frequency.

I was wondering why the former method works and the latter doesn't. Any suggestions?

Thanks
Jyani
0 Replies Last Post 26.09.2014, 10:26 GMT-4
COMSOL Moderator

Hello Jyani Vaddi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content