Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Meshing Tiny Thermal Vias
Posted 18.09.2014, 08:53 GMT-4 Geometry, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi everyone,
By using the Joule Heating Modul, I am trying to get the max. temperature around an electronic component. I have studied similar models before; but this time addionally placed several tiny (in radial direction) and long thermal vias across the PCB.
You can imagine those as really narrow and relatively long cylindrical tunnels connecting both sides of the PCB.
I figured that the "build all" takes forever and meshing gives memory errors. Even if I use an extra coarse mesh the simulation seems like it would take ages.
What would be an ideal (meshing or some other type of) approach to those structures?
Thanks,
Bartu
By using the Joule Heating Modul, I am trying to get the max. temperature around an electronic component. I have studied similar models before; but this time addionally placed several tiny (in radial direction) and long thermal vias across the PCB.
You can imagine those as really narrow and relatively long cylindrical tunnels connecting both sides of the PCB.
I figured that the "build all" takes forever and meshing gives memory errors. Even if I use an extra coarse mesh the simulation seems like it would take ages.
What would be an ideal (meshing or some other type of) approach to those structures?
Thanks,
Bartu
1 Reply Last Post 18.09.2014, 10:13 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Bartu,
This sounds like high aspect ratio geometries that need to be meshed.
We can have a look at your model and suggest possible strategies for the mesh and/or geometry creation.
Feel free to send the model via www.ch.comsol.com/support
Best regards,
Zoran
This sounds like high aspect ratio geometries that need to be meshed.
We can have a look at your model and suggest possible strategies for the mesh and/or geometry creation.
Feel free to send the model via www.ch.comsol.com/support
Best regards,
Zoran