Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

parametric surface

Posted 03.08.2014, 19:01 GMT-4 Results & Visualization Version 4.3, Version 4.3a, Version 4.3b 1 Reply

Asal Bidarmaghz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

I am looking for a way to define a cylinder by using the parametric surface in my modelling. this surface is meant to be used only in post processing part to take a surface average of temperature.

thanks for your help.

ASAL
1 Reply Last Post 04.08.2014, 13:33 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.08.2014, 13:33 GMT-4
Sure, you can do that. In the classical notations for a cylinder aligned with the z axis in a cylindrical coordinate system, use "theta" as your first parameter and z as the second.
Jeff
Sure, you can do that. In the classical notations for a cylinder aligned with the z axis in a cylindrical coordinate system, use "theta" as your first parameter and z as the second. Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content