Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Fluid-Structure Interaction will Not Converge
Posted 05.04.2010, 20:47 GMT-4 3 Replies
Please login with a confirmed email address before reporting spam
Hello Everyone,
I am trying to solve a fairly straight-forward (or so I thought) 2-dimensional fluid-structure interaction problem. The file is attached to this post.
Every time the model attempts to solve, the solution does not converge and there are warning of inverted elements. I have tried refining the mesh and changing mesh parameters, but no luck. I am now thinking that it is a setup problem, but I am unable to locate the problem.
If anyone has any suggestions, they will be greatly appreciated!
Thanks!
I am trying to solve a fairly straight-forward (or so I thought) 2-dimensional fluid-structure interaction problem. The file is attached to this post.
Every time the model attempts to solve, the solution does not converge and there are warning of inverted elements. I have tried refining the mesh and changing mesh parameters, but no luck. I am now thinking that it is a setup problem, but I am unable to locate the problem.
If anyone has any suggestions, they will be greatly appreciated!
Thanks!
Attachments:
3 Replies Last Post 06.04.2010, 12:03 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Are you aware that you are solving for a Reynolds number of 10^7? In that case, you need very special treatment of flow in Comsol, if possible at all to simulate with reasonable mesh size.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thanks, Danial. Thanks for pointing that out. As you might have surmised, reducing the inlet velocity was able to have the model converge. Thanks
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
You're welcome.