Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
heat transfer in ultra-thin membrane
Posted 11.02.2014, 21:38 GMT-5 Heat Transfer & Phase Change Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
When I used pre-defined mesh, it kept gave me warnings if I chose 'extra coarse'. I went ahead and ran simulations anyways, but it gave me error saying that the computation did not converge.
Then I user-defined mesh size (minimum=2um). It did compute but the result looked weird.
The membrane thickness is 600 nano meters but the size of the membrane is 300 microns.
I would have attached my model file but it was too big.
What do you think I could do to overcome this problem?
Many thanks!
Minmin
Hello Minmin Hou
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.