Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Need a help in 3D geometry !!!!!!!

Posted 25.11.2013, 07:20 GMT-5 Structural Mechanics Version 4.3 1 Reply

Raed Alharbi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I want to make the head of the tip round with radius around 12 nm.

Can any one help me on that..... I attached the file...

Thank you,,,

Attachments:

1 Reply Last Post 25.11.2013, 10:37 GMT-5
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25.11.2013, 10:37 GMT-5

Hi,

you can achieve that with the boolean geometry operations. You have to add a sphere at the appropriate location close to the tip and then use the difference, intersection, union operations to generate the desired result.
Make sure you mesh this tiny feature appropriately.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, you can achieve that with the boolean geometry operations. You have to add a sphere at the appropriate location close to the tip and then use the difference, intersection, union operations to generate the desired result. Make sure you mesh this tiny feature appropriately. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content