Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Recreating Jet Flow in COMSOL

Posted 03.03.2013, 13:05 GMT-5 Version 4.3a 1 Reply

Kim Metzler
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have temporal and spatial velocity profiles that I would like to try and recreate in COMSOL. At 0mm from the nozzle (d = 2.4 mm) the velocity is 110 m/s and at 12 mm the velocity is about 100 m/s. It is a 30 ms pulse and fluid is air. I have tried matching these parameters but have not had any luck. I am specifically struggling with time dependence and was wondering if anybody had any suggestions on how to model this effectively. Thank you in advance!

I have attached a screenshot of the velocity profile along with my model.

Thanks again!

Jen & Kim
1 Reply Last Post 04.06.2013, 08:28 GMT-4
COMSOL Moderator

Hello Kim Metzler

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ekkehard Holzbecher
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.06.2013, 08:28 GMT-4
Hi - you can model only half of the system. Take the symmetry axis r=0 as boundary on the left.
You don't loose any results, but have a more slender model with shorter execution time.

Hi - you can model only half of the system. Take the symmetry axis r=0 as boundary on the left. You don't loose any results, but have a more slender model with shorter execution time.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content