How to set boundary condition to obtain extreme electric field on the boundary?

Please login with a confirmed email address before reporting spam

Hello sir,

I met a problem while simulating the coaxial line. I want to analyze different modes of the electromagnetic wave transporting in it. In some certain conditions, I need to set boundary conditions on the both ends of the coaxial line so that the electric field reach its extreme value at the ends. Take an example, for the 1/4 lambda coaxial waveguide for length L, one end can be PEC so the electric field is zero at that end. Could you please tell me how to set boundary condition for the other end, which can successfully simulate the modes Esin(kx), where k=n*pi/2L.

best wishes

Cai


2 Replies Last Post 12.02.2025, 01:45 GMT-5
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 11.02.2025, 12:41 GMT-5
Updated: 2 weeks ago 11.02.2025, 12:43 GMT-5

Sounds like you want to use the RF module, frequency domain, with an eigenfrequency-type study, with a short circuit (a PEC) at one end of your coax and an open circuit (lumped coaxial port with a nearly-infinite impedance) at the other. Be sure to set the solver to look in the vicinity of the resonant frequencies of interest. I just tried that and it worked fine. See the attached image, showing 3 separate solutions (leverages the "array plot" feature). Plot is of the radial component of E. (I would include the .mph file, but I have a more recent version of Comsol Multiphysics than you.)

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Sounds like you want to use the RF module, frequency domain, with an eigenfrequency-type study, with a short circuit (a PEC) at one end of your coax and an open circuit (lumped coaxial port with a nearly-infinite impedance) at the other. Be sure to set the solver to look in the vicinity of the resonant frequencies of interest. I just tried that and it worked fine. See the attached image, showing 3 separate solutions (leverages the "array plot" feature). Plot is of the radial component of E. (I would include the .mph file, but I have a more recent version of Comsol Multiphysics than you.)


Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago 12.02.2025, 01:45 GMT-5

Sounds like you want to use the RF module, frequency domain, with an eigenfrequency-type study, with a short circuit (a PEC) at one end of your coax and an open circuit (lumped coaxial port with a nearly-infinite impedance) at the other. Be sure to set the solver to look in the vicinity of the resonant frequencies of interest. I just tried that and it worked fine. See the attached image, showing 3 separate solutions (leverages the "array plot" feature). Plot is of the radial component of E. (I would include the .mph file, but I have a more recent version of Comsol Multiphysics than you.)

It works. Thank you sir, it helps a lot.

>Sounds like you want to use the RF module, frequency domain, with an eigenfrequency-type study, with a short circuit (a PEC) at one end of your coax and an open circuit (lumped coaxial port with a nearly-infinite impedance) at the other. Be sure to set the solver to look in the vicinity of the resonant frequencies of interest. I just tried that and it worked fine. See the attached image, showing 3 separate solutions (leverages the "array plot" feature). Plot is of the radial component of E. (I would include the .mph file, but I have a more recent version of Comsol Multiphysics than you.) It works. Thank you sir, it helps a lot.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.