density of arrows in contact forces can't be controlled

Please login with a confirmed email address before reporting spam

When there's contact in solid mechanics simulation, there's an automatic node "contact forces" in results. There are Contact 1, Pressure and Contact 1, Friction Force nodes under this node. The density of the arrows (pressure and friction) under these two nodes can't be controlled, as when clicking "uniform" in arrow positioning, no arrow is plotted. Gauss points is the only option but the downside of doing so is that the arrows are too dense if the mesh is fine. How to overcome?


13 Replies Last Post 07.10.2024, 10:56 GMT-4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 25.09.2024, 14:50 GMT-4

The contact forces are shown using a standard Arrow Surface plot. So it has all possible settings for controlling arrow placement and density.

-------------------
Henrik Sönnerlind
COMSOL
The contact forces are shown using a standard *Arrow Surface* plot. So it has all possible settings for controlling arrow placement and density.

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 26.09.2024, 01:33 GMT-4
Updated: 2 months ago 28.09.2024, 00:36 GMT-4

>The contact forces are shown using a standard Arrow Surface plot. So it has all possible settings for controlling arrow placement and density.

thanks but as the attached picture, it looks different from an arrow surface plot

![](http://)![](http://)![](http://)>The contact forces are shown using a standard *Arrow Surface* plot. So it has all possible settings for controlling arrow placement and density. thanks but as the attached picture, it looks different from an arrow surface plot

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 26.09.2024, 02:28 GMT-4

There is no attached picture?

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
There is no attached picture?

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 26.09.2024, 03:42 GMT-4
Updated: 2 months ago 28.09.2024, 00:38 GMT-4

There is no attached picture?

there seems to be a problem. I tried very hard with different browsers but failed to attach the picture.

>There is no attached picture? there seems to be a problem. I tried very hard with different browsers but failed to attach the picture.

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 28.09.2024, 03:53 GMT-4

Posting this for OP.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Posting this for OP.

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 28.09.2024, 03:55 GMT-4

Trying again

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Trying again

Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 28.09.2024, 03:55 GMT-4

Okay, I don't know how to upload pictures here either, sorry.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Okay, I don't know how to upload pictures here either, sorry.

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 29.09.2024, 00:17 GMT-4
Updated: 2 months ago 07.10.2024, 05:14 GMT-4

Dr Christensen thanks so much! Can any forum admin help? There must be a bug with uploading pictures. It used to work!

Dr Christensen thanks so much! Can any forum admin help? There must be a bug with uploading pictures. It used to work!


Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 30.09.2024, 02:26 GMT-4

The problem has been reported to the IT team.

-------------------
Henrik Sönnerlind
COMSOL
The problem has been reported to the IT team.

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 05.10.2024, 00:41 GMT-4

has this IT issue been resolved?

has this IT issue been resolved?

Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 05.10.2024, 04:33 GMT-4
Updated: 2 months ago 05.10.2024, 04:53 GMT-4

Picture upload test: Enjoy!

It is often much easier and faster to test things rather than waiting for a forum response. And it is obvious that some people had been uploading pictures very recently.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Picture upload test: Enjoy! It is often much easier and faster to test things rather than waiting for a forum response. And it is obvious that some people had been uploading pictures very recently.


Please login with a confirmed email address before reporting spam

Posted: 2 months ago 07.10.2024, 05:15 GMT-4

please check this attached picture related to my question

please check this attached picture related to my question


Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 07.10.2024, 10:56 GMT-4

Pictures and screenshots are mostly not very useful. Consider to post the model.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Pictures and screenshots are mostly not very useful. Consider to post the model.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.