Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Thermal conductivity of nanocomposite matrix + particles
Posted 16.10.2023, 12:05 GMT-4 Heat Transfer Version 6.1 3 Replies
Please login with a confirmed email address before reporting spam
Dear colleagues
I need to measure thermal conductivity of nanocomposite polyurethan(matrix)+aluminium(particles). I must be, naturally, something between 0.01 and 100 W/m K. Does somebody know how simple and algorithm for evaluation this parameter? Thanks!
Attachments:
Please login with a confirmed email address before reporting spam
Hello Alexey,
It is certainly possible to evaluate the effective properties of an inhomogeneous material using simulation. See this tutorial for an example. If your composite is periodic, you may be able to get away with simulating a single cell, as illustrated in this second example. If on the other hand you need to generate a large number of nanoparticles randomly distributed in the matrix, see this blog post on how to do it through a script.
Best,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Hello Alexey,
It is certainly possible to evaluate the effective properties of an inhomogeneous material using simulation. See this tutorial for an example. If your composite is periodic, you may be able to get away with simulating a single cell, as illustrated in this second example. If on the other hand you need to generate a large number of nanoparticles randomly distributed in the matrix, see this blog post on how to do it through a script.
Best,
Jeff
I'm grateful for response. I successfully created the geometry of nanocomposite. The only one problem now is how to measure thermal conductivity? Is there some standart algorithm in COMSOL?
Please login with a confirmed email address before reporting spam
You derive the equivalent conductivity of a sample from the formula q=-k*grad(T) .
You run a simulation with an imposed heat flux through the sample and obtain from that simulation the temperature drop; then using the formula above (and the length of the sample, as you can approximate 
) you get k.
Jeff
-------------------Jeff Hiller