Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Stop condition
Posted 25.10.2012, 07:42 GMT-4 Heat Transfer & Phase Change Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
Hi all
I am running a time-depedent heat transfer simulation. I want to stop the simulation when the average temperature is higher than 310K. i defined Tm as the average temperature in the domain. I used the stop condition: 1-mod1.Tm>310 [K], and tried to terminate the simulation when the condition was fulfilled. But it didn't work. Could anyone suggest any solutions? Thanks a lot.
I am running a time-depedent heat transfer simulation. I want to stop the simulation when the average temperature is higher than 310K. i defined Tm as the average temperature in the domain. I used the stop condition: 1-mod1.Tm>310 [K], and tried to terminate the simulation when the condition was fulfilled. But it didn't work. Could anyone suggest any solutions? Thanks a lot.
2 Replies Last Post 25.10.2012, 10:25 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
You need brackets to evaluate the comparison before the subtraction, and you need to make the expression negative for stopping. Try this: 0.5-(mod1.Tm>310 [K]) or even simpler this: mod1.Tm-310[K].
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
thanks a lot. it is solved.