Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to load the temperature field to an block as the body resource load?

Posted 22.10.2012, 22:33 GMT-4 Heat Transfer & Phase Change Version 4.3 4 Replies

Aki Ding
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate the defect detection process on the Al block using the laser-ultrasound,and I don't know how to load the temperature field to an block as the body load.Hoping for help,thanks very much!
4 Replies Last Post 23.10.2012, 03:45 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23.10.2012, 01:30 GMT-4
Hi

what do you mean to load the temperature as a "body load", do you want to fix the temperature ? ir is it the initial value of the temperature ?, If you have a thermal process fixing the body temperature is not really physical, but if you fix it on its borders + initial conditions, and no thermal process will take place then it will remain at that initial temperature

--
Good luck
Ivar
Hi what do you mean to load the temperature as a "body load", do you want to fix the temperature ? ir is it the initial value of the temperature ?, If you have a thermal process fixing the body temperature is not really physical, but if you fix it on its borders + initial conditions, and no thermal process will take place then it will remain at that initial temperature -- Good luck Ivar
Aki Ding
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23.10.2012, 02:58 GMT-4

Hi

what do you mean to load the temperature as a "body load", do you want to fix the temperature ? ir is it the initial value of the temperature ?, If you have a thermal process fixing the body temperature is not really physical, but if you fix it on its borders + initial conditions, and no thermal process will take place then it will remain at that initial temperature

--
Good luck
Ivar


I want to load the temperature field as body resource,like the pressure on the block,but i don't know how to realize this.Are there any models in the model liberary?
[QUOTE] Hi what do you mean to load the temperature as a "body load", do you want to fix the temperature ? ir is it the initial value of the temperature ?, If you have a thermal process fixing the body temperature is not really physical, but if you fix it on its borders + initial conditions, and no thermal process will take place then it will remain at that initial temperature -- Good luck Ivar [/QUOTE] I want to load the temperature field as body resource,like the pressure on the block,but i don't know how to realize this.Are there any models in the model liberary?
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23.10.2012, 03:13 GMT-4
Hi

Define it in the initial conditions, that should do ;)

--
Good luck
Ivar
Hi Define it in the initial conditions, that should do ;) -- Good luck Ivar
Aki Ding
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23.10.2012, 03:45 GMT-4
thanks for your reply
thanks for your reply

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content