Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multicomponent multiphase flow

Posted 10.10.2012, 08:46 GMT-4 Version 4.0a, Version 4.1 3 Replies

Siddharth Kulkarni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am currently simulating a model in which the two carrier phases involved are water and toluene and the diffusing components are acetone and methyl isopropyl ketone (MIPK). This problem is to be solved using the Stefan-Maxwell equations together with the Navier-Stokes equations.

I have the inlet composition and the velocity conditions. I am in a fix as to which model is to be used for this. I have used the pde mode general form for Stefan-Maxwell equations and single phase Incompressible flow model for Navier-Stokes (each phase). I am attaching the model herewith. I am getting some results, but when I change the channel dimensions, the profiles of concentration and velocity do not change.
3 Replies Last Post 15.11.2012, 10:06 GMT-5
COMSOL Moderator

Hello Siddharth Kulkarni

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Negin Kananizadeh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 14.11.2012, 19:37 GMT-5
Hi Siddharth,

I am trying to implement multiphase flow model for my problem, can you please attach your model here so I can learn somthing from you?

Thanks
Hi Siddharth, I am trying to implement multiphase flow model for my problem, can you please attach your model here so I can learn somthing from you? Thanks
Siddharth Kulkarni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.11.2012, 01:02 GMT-5
Hi,

Please find my model attached herewith. I have clearly made use of only the pde mode (general). If you find some basic flaw, please let me know. The distribution coefficients are 2.5 and 65 respectively for the two components.

Siddharth Kulkarni
Hi, Please find my model attached herewith. I have clearly made use of only the pde mode (general). If you find some basic flaw, please let me know. The distribution coefficients are 2.5 and 65 respectively for the two components. Siddharth Kulkarni

Attachments:

Negin Kananizadeh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.11.2012, 10:06 GMT-5
Hi,

Thanks for your fast response. I will take a look at it and let you know, if I find something.

Thanks again,

Negin
Hi, Thanks for your fast response. I will take a look at it and let you know, if I find something. Thanks again, Negin

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content