Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multi-pass continuous laser beam scan

Posted 04.10.2012, 07:10 GMT-4 6 Replies

uday
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi ,

i have one basic question about Multi-pass continuous laser beam scan . i have moved laser beam (Gaussian)with same velocity in y-direction on plate from one end to other end. it was taking 3 sec. then, i want to move heat source from (3.2 sec) original position. Is this possible in comsol GUI? or We should use any script language?

can we use any function to obtain the second time scan?

i used the following heat source for first scan

500[MW/m^3]*an1(sys2.r[1/m])
6 Replies Last Post 02.08.2016, 05:28 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.10.2012, 07:57 GMT-4
Hi

how do you scan w.r.t. to time ? there were a few threads already discussing raster scanning and functions to provide the trajectories ;)

Do not forget that you make discontinuities when you make sudden jumps, this gives some issues often for the solver to converge

--
Good luck
Ivar
Hi how do you scan w.r.t. to time ? there were a few threads already discussing raster scanning and functions to provide the trajectories ;) Do not forget that you make discontinuities when you make sudden jumps, this gives some issues often for the solver to converge -- Good luck Ivar
uday
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.10.2012, 08:20 GMT-4
Hi ivar,

thank you for your quick reply. i want to move laser beam w.r.t time. i have used (V*t) this expression. V-is a speed of laser beam. i have used cylinderical co-ordinates to movement.but , i could not get the second pass.

How can i get second pass?

then,i want to move the spot w.r.t time and space?
how can acheive?


can you give any example (time and space dependent)?

sorry for the lot of questions

thank you ivar...
Hi ivar, thank you for your quick reply. i want to move laser beam w.r.t time. i have used (V*t) this expression. V-is a speed of laser beam. i have used cylinderical co-ordinates to movement.but , i could not get the second pass. How can i get second pass? then,i want to move the spot w.r.t time and space? how can acheive? can you give any example (time and space dependent)? sorry for the lot of questions thank you ivar...
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.10.2012, 12:45 GMT-4
define to different functions, one for each type of movement. Then combine them through boolean operators: f1*(t<t1)+f2*(t>t2)
define to different functions, one for each type of movement. Then combine them through boolean operators: f1*(tt2)
uday
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 05.10.2012, 02:45 GMT-4
Hi Alex,

thank you for your response. but i could not understand. can you explain more....where can i find boolean operator..

i want to pass the (moving heat flux) beam 3 times in same path.can i use boolean operator..


can you help me?

Hi Alex, thank you for your response. but i could not understand. can you explain more....where can i find boolean operator.. i want to pass the (moving heat flux) beam 3 times in same path.can i use boolean operator.. can you help me?
Ashish Mishra
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.06.2016, 03:49 GMT-4
Mr. Alexander
thanks a lot. Your reply really helped a lot.

Ashish Mishra
Mr. Alexander thanks a lot. Your reply really helped a lot. Ashish Mishra
Adhitan Kasinathan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 02.08.2016, 05:28 GMT-4

Hi

how do you scan w.r.t. to time ? there were a few threads already discussing raster scanning and functions to provide the trajectories ;)

Do not forget that you make discontinuities when you make sudden jumps, this gives some issues often for the solver to converge

--
Good luck
Ivar



Hi Ivar,

While modeling, I am getting some relative residual error(singularity error) because of the discontinuity in time domain. Could you tell me how to make it smooth ?

Thank you.


[QUOTE] Hi how do you scan w.r.t. to time ? there were a few threads already discussing raster scanning and functions to provide the trajectories ;) Do not forget that you make discontinuities when you make sudden jumps, this gives some issues often for the solver to converge -- Good luck Ivar [/QUOTE] Hi Ivar, While modeling, I am getting some relative residual error(singularity error) because of the discontinuity in time domain. Could you tell me how to make it smooth ? Thank you.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content