Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Typo in equation in "Dynamic Electric Currents Equations" help
Posted 05.09.2012, 23:19 GMT-4 Low-Frequency Electromagnetics Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Searching for "Dynamic Electric Currents Equations" in Comsol's help system gives a page with a few equations (note: under "Theory for the Electric Currents Interface", not for the Shell interface).
The third-last equation from the bottom (equation 4-2) seems to have the sign of P incorrect, it should be a minus not a plus. (Note, for example, that the equivalent equation for frequency domain, third from top on that page, has the sign the right way around.)
Where should documentation errors be reported in general?
Comsol version: 4.2.1.166
The third-last equation from the bottom (equation 4-2) seems to have the sign of P incorrect, it should be a minus not a plus. (Note, for example, that the equivalent equation for frequency domain, third from top on that page, has the sign the right way around.)
Where should documentation errors be reported in general?
Comsol version: 4.2.1.166
1 Reply Last Post 06.09.2012, 11:33 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
for COMSOL to record any errors, bugs or other you must send the info to "support" see the corresponding web site, or to your local rep. Here on the Forum we are only users and cannot change anything (directly) in the soft ;)
--
Good luck
Ivar
for COMSOL to record any errors, bugs or other you must send the info to "support" see the corresponding web site, or to your local rep. Here on the Forum we are only users and cannot change anything (directly) in the soft ;)
--
Good luck
Ivar