Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
charged particle tracing help needed
Posted 18.07.2012, 08:55 GMT-4 Low-Frequency Electromagnetics, Studies & Solvers Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
with the mef module i created a magnetic field along the x axis with 10 A/m.
i used a working plane inside the box to create a circlular plain as the inlet surface for the particles.
in the cpt module i gave the particles a starting velocity of 50 m/s along the z axis.
i also added a magnetic force to the cpt module that uses the field created from the mef module.
the stationary study creates the solution for the magnetic field, as expected.
in the time dependent study i excluded the calculation of the mef module as shown in the magnetic lens video
www.comsol.com/video/209
my problem is that i dont get any resulting particle trajectories. the particles just sit on the inletsurface. i just want to see them fly a curve through the magnetic field due to lorentz force.
i attached the file to exclude any misunderstandings, thanks for help
Attachments:
Hello Robin Kieser
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam