Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Need help with Magnetic and Electric Fields Error

Posted 18.05.2012, 13:44 GMT-4 Low-Frequency Electromagnetics Version 4.2a 3 Replies

Jarred Young
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Greetings,

I'm trying to generate a model with a cylindrical anode, two metallic electrodes, and two magnets with the MER Module so I can model both the E and B Fields together so I can look at ExB drift effects. However, I keep getting this same error:

Failed to find a solution.
Singular matrix.

There are 213295 void equations (empty rows in matrix) for the variable mod1.V.
at coordinates: (-0.308496,-0.261123,-0.294355), (-0.299595,-0.278459,-0.287582), (-0.289647,-0.29545,-0.280739), (-0.288168,-0.272107,-0.304823), (-0.278712,-0.28882,-0.298166), ...
and similarly for the degrees of freedom (empty columns in matrix).
Returned solution is not converged.

I've double-checked all of my material properties and I've input the electric potentials using the Initial Values, but it's still having a hard time looking for the voltage (?). I'm not sure what boundary conditions I've missed to get a singular matrix and nothing's popping out at me. Does anyone have any ideas?

Live Long and Prosper,
JAY

P.S.: I can't attach my file because the size of the file is too large.
3 Replies Last Post 18.05.2012, 16:41 GMT-4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.05.2012, 14:42 GMT-4
Hmm. Not sure, based on the limited info. There may be a clue in your statement that you "input the electric potentials using the Initial Values." I haven't used the AC/DC module much lately, but "initial values" doesn't sound like the right place to specify electric potentials. Potentials would normally be specified as boundary conditions, not initial values, for most problems.
Hmm. Not sure, based on the limited info. There may be a clue in your statement that you "input the electric potentials using the Initial Values." I haven't used the AC/DC module much lately, but "initial values" doesn't sound like the right place to specify electric potentials. Potentials would normally be specified as boundary conditions, not initial values, for most problems.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.05.2012, 15:47 GMT-4
Hi

If it's i MEF are you sure all your materials have some conductance ?
0[S/m] is not allowed, use 1 or 10 for air, even if it is not really "true"

--
Good luck
Ivar
Hi If it's i MEF are you sure all your materials have some conductance ? 0[S/m] is not allowed, use 1 or 10 for air, even if it is not really "true" -- Good luck Ivar
Jarred Young
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.05.2012, 16:41 GMT-4
Ivar,

Thanks for the advice. My solution is converging now and I'm getting results that are comparable with my B-Field only model. Thank you!

Live Long and Prosper,
JAY
Ivar, Thanks for the advice. My solution is converging now and I'm getting results that are comparable with my B-Field only model. Thank you! Live Long and Prosper, JAY

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content