Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Inflation of a cylinder
Posted 12.04.2012, 14:49 GMT-4 Structural Mechanics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I m trying to simulate a very known benchmark problem, inflation of a thin cylinder due to an internal pressure (the problem is time dependent). In order to so, i used Shell physics and have modeled only a quarter of the cylinder while using the appropriate symmetrical conditions. The cylinder height is 5, thickness is 0.1, Module Young is 1.2*10^6 and Poisson ratio is 0.495 (it is isotropic). Another B.C is that the lower and upper edges cant move in the Z direction.
According to theory, when applying an increasing internal pressure i should receive a convergence in the graph of the internal pressure vs. the ratio between the deformed radius and the original one. unfortunately, i dont get this desired convergence in this graph but just the opposite.
I'd really be pleased to get some help
thx
Hello Iftah Nudel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.