Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Beam envelope requirement for refractive index
Posted 13.11.2020, 04:53 GMT-5 Wave Optics Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
Using the wavelength domain to study in beam envelope,when the refractive index is not 1 but 2 or 3 or bigger in beam envelope, the input signal is not seam as you set the input signal. For example, when the input electric filed is 1, the input signal of a one-dimensional map is not 1 after calculating, and the value of the input electric filed is gradually reduced lower 1 as the refractive index value increasing. When the refractive index and input electric filed are 2 and 1 respectively, a maximum of one dimensional map of the input electric filed to reach between 0.7 and 0.8. The frequency domain electromagnetic waves will not appear this problem, why this problem exisits in the beam envelope? Whether the electromagnetic wave beam envelope should not be used for the study of refractive index is greater than 1 medium?
Hello Yunyun Lai
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.