Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to transform Bézier Polygon into a 2D surface?
Posted 11.01.2012, 11:13 GMT-5 Geometry Version 4.0 1 Reply
Please login with a confirmed email address before reporting spam
hey peeps
I build three natural faults using Bézier Polygon, which are integrated into a chunk of 3D blocks (see attached image) and within four 2D (surface) fractures, as well as two 1D (edge) wells.
I need to assign boundary conditions to these three faults i.e. (internal) no flow boundary, I think I first have to transform them into 2D surfaces, correct me if wrong. How to do it?
ps: I tried 'convert to surface' feature but they just disappear upon 'build selected'.
many thanks for help!!!
regards
Liwah
I build three natural faults using Bézier Polygon, which are integrated into a chunk of 3D blocks (see attached image) and within four 2D (surface) fractures, as well as two 1D (edge) wells.
I need to assign boundary conditions to these three faults i.e. (internal) no flow boundary, I think I first have to transform them into 2D surfaces, correct me if wrong. How to do it?
ps: I tried 'convert to surface' feature but they just disappear upon 'build selected'.
many thanks for help!!!
regards
Liwah
1 Reply Last Post 11.01.2012, 12:46 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I suspect you need at least v 4.2 if not the latest upates to perform such large 3D mappings. Check with your local rep
--
Good luck
Ivar
I suspect you need at least v 4.2 if not the latest upates to perform such large 3D mappings. Check with your local rep
--
Good luck
Ivar