Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Implement stationary study loop inside other transient study

Please login with a confirmed email address before reporting spam

I am trying to implement solution model similar to laser welding process as Mr. M.Courtois et al describes in the paper "A new approach to compute multi-reflections of laser beam in a keyjole for heat transfer and fluid flow modelling in laser welding". Electrimagnetic waves interface is stationary and oher interfaces are transient, as shown on the picture. How is it technically possible to couple solwers in that way so steady-state solver invokes on every time step of separate transient solver? I spent much time searching bun have not found straightforward answer.



1 Reply Last Post 06.11.2019, 09:17 GMT-5
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 06.11.2019, 09:17 GMT-5
Updated: 5 years ago 06.11.2019, 09:17 GMT-5

Andrey,

this might be a case for Comsol's frequency transient interface. Check the application library model in RF Module -> Microwave Heating -> rf_heating

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Andrey, this might be a case for Comsol's frequency transient interface. Check the application library model in RF Module -> Microwave Heating -> rf_heating Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.