Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Thermofluidic Modelling of hydrogen absorption in metal hydride bed

Posted 18.05.2011, 05:44 GMT-4 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Chemical Reaction Engineering, Parameters, Variables, & Functions Version 4.1, Version 4.3, Version 4.3a 14 Replies

Muhammad Assad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For learning purposes, I was trying to do the this project Thermofluidynamic Modelling of hydrogen absorption and desorption in a LaNi4.8Al0.2 Hydride Bed at www.comsol.com/papers/7311/download/Lombardo.pdf (published in Comsol conference 2009 Milan). Except instead of two subdomain, I have only one domain containing the porous media and hydrogen enters the cylender through inlet. I am using the Darcy Law's Module and Heat transfer in Porous medium module. For kinetic expression, I have defined the formula in the definition section. I am using the same values and formulas defined in this paper. When I tried to run the program, I get errors which are associated with heat source definition and hydrogen mass absorption rate definition. Furthermore, I would like to see how would you plot the temperature and internal pressure plots which are published in the paper.


I have attached the file. Thank you in advance.

Attachments:

14 Replies Last Post 27.05.2016, 15:48 GMT-4
COMSOL Moderator

Hello Muhammad Assad

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Sofoklis Makridis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26.11.2011, 04:44 GMT-5
Dear colleague,
Did you solve the problem? In case you did, please send the improved model.
Regards
Dear colleague, Did you solve the problem? In case you did, please send the improved model. Regards
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 09.02.2013, 07:22 GMT-5
Hi
Did you get the improved model?
If YES, can i have it too?
Hi Did you get the improved model? If YES, can i have it too?
Nessy Greenderson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.08.2014, 12:28 GMT-4
There are multiple syntax errors (missing * sign, m63 instead m^3) or maybe they've appeared when i opened the file with comsol 4.3
Also, you have circular dependency: rhoss depends on Qm wich depends on phoss
You'll need to solve equation of hydrogen concentration (chemical reaction's rate equation). Look at appropriate articles, for example, M. GAMBINI, METAL HYDRIDE ENERGY SYSTEMS PERFORMANCE EVALUATION. PART A: DYNAMIC ANALYSIS MODEL OF HEAT AND MASS TRANSFER

I'm currently working on almost same case, but it keep giving me an error "trying to find logarithm of negative number" while the expression is log(abs(p)) !...
There are multiple syntax errors (missing * sign, m63 instead m^3) or maybe they've appeared when i opened the file with comsol 4.3 Also, you have circular dependency: rhoss depends on Qm wich depends on phoss You'll need to solve equation of hydrogen concentration (chemical reaction's rate equation). Look at appropriate articles, for example, M. GAMBINI, METAL HYDRIDE ENERGY SYSTEMS PERFORMANCE EVALUATION. PART A: DYNAMIC ANALYSIS MODEL OF HEAT AND MASS TRANSFER I'm currently working on almost same case, but it keep giving me an error "trying to find logarithm of negative number" while the expression is log(abs(p)) !...
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.09.2014, 16:48 GMT-4
I did something to the file and tried to improve it.
The main problem is in the heat source equation and inconsistent units.
If you wish we can work that together.
I am also trying to so that using FlexPDE software.
I did something to the file and tried to improve it. The main problem is in the heat source equation and inconsistent units. If you wish we can work that together. I am also trying to so that using FlexPDE software.
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10.10.2014, 09:53 GMT-4
If interested I can send you the file by e-mail.
If interested I can send you the file by e-mail.
Ismail Hilali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 14.01.2015, 06:47 GMT-5
yes, please send me files.

yes, please send me files.
Ankit Tiwari
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 15.01.2015, 07:05 GMT-5
Try out with some constant values...may be you will get results..i am also hydrogen storage models..till now my results are not satisfactory....
Try out with some constant values...may be you will get results..i am also hydrogen storage models..till now my results are not satisfactory....
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 29.03.2015, 14:51 GMT-4
what is your e-mail?
what is your e-mail?
Ismail Hilali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 30.03.2015, 08:39 GMT-4
e-mail adress: ihilali@gmail.com
e-mail adress: ihilali@gmail.com
Djafar Chabane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 21.04.2015, 03:31 GMT-4
Hi
I used comsol for the same problem, can you please send me the model?
Many thanks.
Hi I used comsol for the same problem, can you please send me the model? Many thanks.
Djafar Chabane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 21.04.2015, 03:38 GMT-4
I downlod your model and i think there is a lot of thing miss in your model.
me i used the PDE for hydrogen absorption rate.
my problem is just related with initial and bondary conditions.
if you want, we can work together.
I downlod your model and i think there is a lot of thing miss in your model. me i used the PDE for hydrogen absorption rate. my problem is just related with initial and bondary conditions. if you want, we can work together.
Djafar Chabane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 21.04.2015, 05:33 GMT-4
yes, please send me files
yes, please send me files
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 28.05.2015, 14:54 GMT-4
What is your e-mail? Mine is jehadyam@yahoo.com
What is your e-mail? Mine is jehadyam@yahoo.com
Jehad Yamin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 27.05.2016, 15:48 GMT-4
Did you solve your problem with the metal hydride model?
Did you solve your problem with the metal hydride model?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content