Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
boundary condition
Posted 04.05.2011, 03:38 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
in 2D stationary PDE
if i put the initial value of u=10 (for example) at certain boundary.
After solution
when calculate u at this boundary I don't find it 10 but a value near it?
Regards
in 2D stationary PDE
if i put the initial value of u=10 (for example) at certain boundary.
After solution
when calculate u at this boundary I don't find it 10 but a value near it?
Regards
1 Reply Last Post 04.05.2011, 09:46 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
You are applying the boundary condition normal to the boundary ( 1D) and comsol showing you the calculated boundary, i.e., check the normal value to your boundary, you will find the applied value.
You are applying the boundary condition normal to the boundary ( 1D) and comsol showing you the calculated boundary, i.e., check the normal value to your boundary, you will find the applied value.