Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to evaluate variable jacobian!..

Posted 25.03.2011, 08:27 GMT-4 Fluid & Heat, Heat Transfer & Phase Change Version 4.3 5 Replies

Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody,

I want to simulate a heat transfer and navier stokes problem. I have two subdomains. In one of the subdomains only the heat transfer equation is solved, not the navier stokes equation.

To implement this condition I uncheck the tick of the navier stokes application mode "valid in this subdomain"

But I encounter and error error 6250 "Failed to evaluate variable jacobien" variable u subdomain....

I cannot find anything about the error code 6250..

What could be the problem?

How can I solve this problem?

atilla savas
5 Replies Last Post 25.01.2015, 14:46 GMT-5
Xiaogai Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25.03.2011, 10:39 GMT-4
Hi,

Is "u" the name of the variable for Navier stokes module?
Do you have coupling between heat transfor and Navier Stoke modules in the model?

If it is, then I guess one possible reason might be you didn't solve the Navier stokes equation on subdomain, but you used the solution of Navier stokes equation (say u) coupling in the heat transfer module.

XLi
Hi, Is "u" the name of the variable for Navier stokes module? Do you have coupling between heat transfor and Navier Stoke modules in the model? If it is, then I guess one possible reason might be you didn't solve the Navier stokes equation on subdomain, but you used the solution of Navier stokes equation (say u) coupling in the heat transfer module. XLi
Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25.03.2011, 13:40 GMT-4
Thank you Xli,

I solved the problem, there was a convective term including velocity u value, when I set it to zero, it is ok now.

atilla
Thank you Xli, I solved the problem, there was a convective term including velocity u value, when I set it to zero, it is ok now. atilla
Umar Zeeshan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26.07.2012, 09:02 GMT-4
Hallo.
hey guys..

I have the same problem.
Error is faild to evaluate variable jacobain,
I'm trying to coule the Electromagnetic with Non-isothermal Heating, for heating the water with microwaves.
any Idea how to solve it.
I attach the problem Pics in attach file.

Shall be very thankful to all

Bye
Umar
Hallo. hey guys.. I have the same problem. Error is faild to evaluate variable jacobain, I'm trying to coule the Electromagnetic with Non-isothermal Heating, for heating the water with microwaves. any Idea how to solve it. I attach the problem Pics in attach file. Shall be very thankful to all Bye Umar

Attachments:

Philip David Flammer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 24.10.2014, 16:50 GMT-4
For those who look at this later, it happens sometimes because one physics is trying to access a variable from another physics that is not activated in that domain.
For those who look at this later, it happens sometimes because one physics is trying to access a variable from another physics that is not activated in that domain.
Gongda Lu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 25.01.2015, 14:46 GMT-5
Philip is exactly right, at least it solved my problem. I was totally unaware that the variable definition has been somehow deactivated on the domain.
Philip is exactly right, at least it solved my problem. I was totally unaware that the variable definition has been somehow deactivated on the domain.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content