Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Plot Average Boundary Face Value with Time - Transient Conduction
Posted 07.03.2011, 16:49 GMT-5 Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
I feel like I have a simple question, but cannot figure it out in COMSOL. I have a transient heat conduction problem with a rectangular domain. Two faces are convecting energy out of the domain and I want to see how one of these face temperatures changes with time. To do this, I would like to plot the average face value (3D domain, hence face is a 2D surface) with time. Each time step should correspond to a single, average value - apparently this is extremely not straight forward is a program made for visualizing PDE solutions.
Your help is appreciated. Thanks!
Please login with a confirmed email address before reporting spam
you can calculate the average value of a boundary (=face in 3D) or edge in 2D) with the "average" operator in the Definition node.
You need to "update your model, or resolve it to get it active on the results, once created.
--
Good luck
Ivar