Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electromagnetic force on iron plate

Posted 04.03.2017, 06:37 GMT-5 Low-Frequency Electromagnetics Version 5.2a 2 Replies

Andrey Ivanov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello! I made a simple model with AD/DC Magnetic fields no current module. There is a cylindrical magnet and iron plate in it. Iron plate has relative permibility 4000 mur. I calculate the force with which magnet pull the plate. And I get a good result when there is a distance between magnet and the plate. But when the distance between them is 0 (that means that the magnet is in contact with the plate), I suddenly got wrong number. For example, with distance 0.1 mm I get the force about 30 N, but when the distance is 0 - the force is -5.8. How it can be explained? Thank you!
2 Replies Last Post 08.03.2017, 10:30 GMT-5
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 07.03.2017, 10:42 GMT-5
Hi Andrey,

Please see "Magnetic Force/Torque" topic in this blog post:

www.comsol.com/blogs/modeling-magnetic-bearings-in-comsol-multiphysics/

The force calculation when magnet is touching the iron/permeable material is wrong. You would need to apply a thin layer of Thin Low permeability gap to get correct answer.

Hope this helps.

Best Regards,
Nirmal
Hi Andrey, Please see "Magnetic Force/Torque" topic in this blog post: https://www.comsol.com/blogs/modeling-magnetic-bearings-in-comsol-multiphysics/ The force calculation when magnet is touching the iron/permeable material is wrong. You would need to apply a thin layer of Thin Low permeability gap to get correct answer. Hope this helps. Best Regards, Nirmal
Andrey Ivanov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 08.03.2017, 10:30 GMT-5
Thank you! Now it's clear!
Thank you! Now it's clear!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content