Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Lagrange multiplier in axial symmetry
Posted 11.01.2017, 12:46 GMT-5 Heat Transfer & Phase Change, Geometry, Mesh Version 5.2 2 Replies
Please login with a confirmed email address before reporting spam
i am modelling a moving boundary interface (Stefan Problem), using the Lagrange multiplier T_lm from heat transfer analysis for prescribed normal mesh velocity in the deformed geometry physics.
The model is almost identical to the 2D Tin melting front example from Comsol library:
www.comsol.com/model/tin-melting-front-6234
except that I work in axial symmetry and my interface is perpendicular to the axis of symmetry.
When I solve, the Lagrange multiplier T_lm is always zero at r=0. I guess I am missing something fundamental here ? Does anyone have a hint for me ?
Thank you and Regards
--
______
Flanell
Hello Flanell
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
In fact, the Lagrange multiplier T_lm should be in W/m2, but for symetric problems is in W/m. you should easily just use: T_lm [W/m^2]/(rho_Si*DelH*r*pi) instead of T_lm [W/m^2]/(rho_Si*DelH). In this case the Lagrange multiplier transfer from "per radius" to "per area (Pi*r*r*)"
Please login with a confirmed email address before reporting spam
thanks alot!
I figured it out alreday and it works like you said
Best
--
______
Flanell