Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Help for a simple Joule Heating simulation
Posted 26.10.2016, 04:50 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hello Community,
i have a little Problem with Creating a simple Simulation.
I need to know the temperature distribution in Carbon Fibre (200x200mm), when i create current apparent power(for example 300VA).
I used this software before, but for a simplified simulation. So now i have no idea how to create the test setup. There is an attachment with a simple Setup.
Thank you for helping.
I hope the Topic Joule Heating is the right one.
fs5.directupload.net/images/161026/dfu4yco2.jpg
i have a little Problem with Creating a simple Simulation.
I need to know the temperature distribution in Carbon Fibre (200x200mm), when i create current apparent power(for example 300VA).
I used this software before, but for a simplified simulation. So now i have no idea how to create the test setup. There is an attachment with a simple Setup.
Thank you for helping.
I hope the Topic Joule Heating is the right one.
fs5.directupload.net/images/161026/dfu4yco2.jpg
1 Reply Last Post 26.10.2016, 09:48 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello Dmitrij,
One of the two tutorials in the "Introduction to COMSOL Multiphysics" manual, version 5.2a, demonstrates step-by-step how to set up a Joule heating model. All manuals can be access through File>Help>Documentation.
You will find additional tutorials on Joule heating in the Applications Libraries (also under the File menu), as well as on the COMSOL website, see for instance this very didactic video: www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics .
Best regards,
Jeff
One of the two tutorials in the "Introduction to COMSOL Multiphysics" manual, version 5.2a, demonstrates step-by-step how to set up a Joule heating model. All manuals can be access through File>Help>Documentation.
You will find additional tutorials on Joule heating in the Applications Libraries (also under the File menu), as well as on the COMSOL website, see for instance this very didactic video: www.comsol.com/video/how-set-up-run-simulation-comsol-multiphysics .
Best regards,
Jeff