Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

modelling in comsol multiphysics

Please login with a confirmed email address before reporting spam

Hi,

I'm a beginer in comsol; I would to model with a PDE Mode coupled by a plane strain module. In comsol multiphysics plane strain module, in subdomain settings there is no possibility to put different material properties for diffreent directions (see the 1 attached file).
But external to Comsol Multiphysics, specifically in structural mechanics module, one can apply n ot isotropic materials. why is that?
Someone can help me?

Another question is: Can I coupling a PDE Mode (with Comsol Multiphysics) with a plane strain module from structural mechanics? That is because I have an orthotropic material.

Thank you the whole people that ever seen this post


1 Reply Last Post 19.12.2010, 03:56 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19.12.2010, 03:56 GMT-5
Hi

What do you mean by different material properties in different direction ?

materials are isotropic or anisotropic with some grades in between, but for this you need to define the stress tensor fully, COMSOL have different combinations made up reasdily. Check the doc about anisotropic material (such as crystals or sometime fibred material). The main difficulty with these materials are to define correctly the direction, and to get univoquely the material constants (as often there are several to adjust)

--
Good luck
Ivar
Hi What do you mean by different material properties in different direction ? materials are isotropic or anisotropic with some grades in between, but for this you need to define the stress tensor fully, COMSOL have different combinations made up reasdily. Check the doc about anisotropic material (such as crystals or sometime fibred material). The main difficulty with these materials are to define correctly the direction, and to get univoquely the material constants (as often there are several to adjust) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.