Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

inverse heat conduction

Posted 23.06.2010, 03:31 GMT-4 2 Replies

Luigi Mongibello
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody, is it possible to solve an "inverse heat conduction" problem using Comsol solver? The aim is to find the boundary heat flux on a disk surface, using boundary and internal temperature values.
Thanks
2 Replies Last Post 28.06.2010, 09:27 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 24.06.2010, 09:03 GMT-4
Hi

inverse problems, defined as mean square optimisation problems are readily solved, you need to define your global variable for the k heat conduction such that your overall conditions are fulfilled. This is what COMSOL uses internally for many specific BC definitions. Check the doc, more in the optimisation but you do not need the optimisation module for one variable. I.e. V3.5 structural doc how to apply torque moment loads

Have fun Comsoling
Ivar
Hi inverse problems, defined as mean square optimisation problems are readily solved, you need to define your global variable for the k heat conduction such that your overall conditions are fulfilled. This is what COMSOL uses internally for many specific BC definitions. Check the doc, more in the optimisation but you do not need the optimisation module for one variable. I.e. V3.5 structural doc how to apply torque moment loads Have fun Comsoling Ivar
Luigi Mongibello
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28.06.2010, 09:27 GMT-4
Many thanks!

Luigi
Many thanks! Luigi

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content