Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
The MEMS model problem
Posted 10.11.2014, 03:46 GMT-5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I have several questions about the MEMS model and the general use of COMSOL.
I try to build a similar model as the MEMS tutorial example,However, it has a problem about
failed to find a solution for the initial parameter. Does that means I lost BCs? furthermore, I did not define BCs for the bottom part as the tutorial model. in the tutorial, it does not define the BCs for the BASE.
Moreover, when I use the electromechanics model, do I need to define every boundary? some BCs are not known, how could I define them?
cheers,
I have several questions about the MEMS model and the general use of COMSOL.
I try to build a similar model as the MEMS tutorial example,However, it has a problem about
failed to find a solution for the initial parameter. Does that means I lost BCs? furthermore, I did not define BCs for the bottom part as the tutorial model. in the tutorial, it does not define the BCs for the BASE.
Moreover, when I use the electromechanics model, do I need to define every boundary? some BCs are not known, how could I define them?
cheers,
1 Reply Last Post 10.11.2014, 03:58 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
One more thing, if I use the domain to define some parts, do I need to provide the BCs for the same parts? Or the defining domains include the BCs?