Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
SRR modelling in comsol
Posted 08.10.2013, 04:41 GMT-4 RF & Microwave Engineering, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2, Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
As I am quite new to the comsol, I really need some advice & help on how to model a periodic split ring resonator (SRR) medium. To make things easier, I started with modelling a single SRR. I created the SRR geometry and enclosed it with a solid air-box. I defined the SRR as PEC. To introduce an excitation, I used scattering boundaries in all 6 directions of the box (a total of 3 scattering boundary conditions). I defined the direction of the wave vector and polarization in one of them only. Now, is this set up correct ? What kind of boundary conditions would you use ? How would you excite the model ?
Furthermore, I wish to make a plot for the transmitted power vs frequency. Should I introduce ports to do that ?
Thanking you very much in advance,
M.
Please login with a confirmed email address before reporting spam
Thanks,
M.
Please login with a confirmed email address before reporting spam
This is R.Karthik raja doing my masters. i am doing my final year project on Split ring resonator and i am finding difficult to build since i am new to it. So please can anyone say me the step by step process to build it or send your model so that i can understand and build my own model.