Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Define an arbitrary EM wave

Posted 07.08.2013, 10:19 GMT-4 RF & Microwave Engineering, Heat Transfer & Phase Change Version 4.3b 4 Replies

John Smith
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello
I am new in Comsol and i have a problem :
i want to calculate SAR for SAM phantom for different types of EM waves. but the source of EM waves ( signal generator ) isn't important. is there any wave to just define wave equation ? for example just define an incoming Gaussian wave and see its effects ?
Can i use Comsol model (SAR in human head) and remove the antenna and define an incoming EM wave instead of it ?
4 Replies Last Post 18.08.2013, 06:04 GMT-4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12.08.2013, 09:56 GMT-4
I think you should be able to do this using the RF module in the transient (aka, time-domain) formulation. That way, you can specify a wave as a function of time. And you can even use the built-in gaussian function.

I think you should be able to do this using the RF module in the transient (aka, time-domain) formulation. That way, you can specify a wave as a function of time. And you can even use the built-in gaussian function.
John Smith
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12.08.2013, 22:21 GMT-4
Dear Robert
Thank you. i see but to specify a spacial direction , we should used Ports ?
Dear Robert Thank you. i see but to specify a spacial direction , we should used Ports ?
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.08.2013, 21:37 GMT-4
If you define a geometric face as a "scattering boundary condition," you can specify the individual vector components of the fields and also of the k vector on that boundary, thus giving you general control of the wave direction, field amplitude and phase distribution, etc. Just be careful to do all your trigonometry and complex-fields-defining correctly. The "port" boundary conditions offered in the RF module appear to be of more-limited utility in the time-domain than in the frequency-domain. In the frequency domain, I use ports for most of my RF sources.

Added later: I regret implying that you should or must use complex fields. Using real-valued fields in time-domain mode should work fine.
If you define a geometric face as a "scattering boundary condition," you can specify the individual vector components of the fields and also of the k vector on that boundary, thus giving you general control of the wave direction, field amplitude and phase distribution, etc. Just be careful to do all your trigonometry and complex-fields-defining correctly. The "port" boundary conditions offered in the RF module appear to be of more-limited utility in the time-domain than in the frequency-domain. In the frequency domain, I use ports for most of my RF sources. Added later: I regret implying that you should or must use complex fields. Using real-valued fields in time-domain mode should work fine.
John Smith
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.08.2013, 06:04 GMT-4
Thank You
I got it
Thank You I got it

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content