Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simulate the electric field and potential distribution

Posted 25.04.2013, 07:25 GMT-4 Low-Frequency Electromagnetics Version 4.3 1 Reply

Murugan Natarajan

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I am using AC/DC module to simulate the electric field and potential distribution over a high voltage composite insulator. when applying AC input voltage. I got the electric field distribution E (V/m) over the insulator. But electric field distribution around high voltage terminal only.

However, I have one problems:
1) In this model, I got uniform potential distribution(V) but non-uniform electric field distribution(V/m).
How to get uniform field distribution over the surface of the insulator and also see, if any parameter missing in the model.

size of the model is 17MB, how to attact to u.if any email contact.

Could anyone please help me.

Your help is much appreciated

1 Reply Last Post 25.04.2013, 08:14 GMT-4

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

the easiest way to upload a file, is to Edit Clear all solutions, clear all mesh, file reset model, save as: new name. Then upload

--
Good luck
Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

simulate the electric field and potential distribution

Suggested Content