Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to view cross section temperiture distribution?

Please login with a confirmed email address before reporting spam

Dear all,
I finished the calaulation of a very simple model of Heat Transfer. How to view the cross sectional temperiture distribution?

Thanks

Baofeng


3 Replies Last Post 18.05.2012, 03:50 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.05.2012, 15:32 GMT-4
Hi

study the Data Set right click Cut plane and related options, then add a plot surface pointing to your cut plane

--
Good luck
Ivar
Hi study the Data Set right click Cut plane and related options, then add a plot surface pointing to your cut plane -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.05.2012, 16:48 GMT-4
Hey Ivar,
I tried it. It works, But How to hide the contour of the model and exhibit the cut plane only?

Thanks!!
Baofeng
Hey Ivar, I tried it. It works, But How to hide the contour of the model and exhibit the cut plane only? Thanks!! Baofeng

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.05.2012, 03:50 GMT-4
Hi

the black contour is adjusted in the main plot node options

--
Good luck
Ivar
Hi the black contour is adjusted in the main plot node options -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.