Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Fluid structure interaction for a cantilever undergoes fluid effect
Posted 02.02.2012, 18:33 GMT-5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I am encountering a problem of using fsi model. Basically I looked at the model Comosl provide, it's model ID 987, the instruction they provide is based on comsol version 3.5. Howver I am using comsol 4.1 also 4.2. So I am trying to create the same model but using just a cantilever (prismatic beam) insead of that complex geometry, also I am using fsi module. But I don't know what's is wrong with my model.
One problem I found is due to solver difference. The other might due to boundary conditions I am using.
I am uploading this file so can any one look at this and help me with some solutions?
Thank you in advance.
I am also uploading the model ID 987 the comsol provides
Attachments:
Hello Jinjin Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.