Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

defining a no-flux 2D surface on top of a 3D box

Posted 24.02.2017, 11:33 GMT-5 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Simulation Apps, Mesh, Studies & Solvers Version 5.2 10 Replies

Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi Everyone,

i'm qiute novice to comsol and have the following problem:

i need to to visualize diffusion in a 3D box made of GaAs that has a round mask on its top surface. now i know that i can just create a 3D thin mask of say Titanium, mesh it, have flux on the whole thing and solve. i was thinking though of not wasting mesh on a structure that its only purpose is to create a no-flux surface underneath it. so i was thinking to create a no-flux 2D round surface on top of the top surface of the GaAs box but couldnt figure out the way to do it. please help
10 Replies Last Post 01.03.2017, 13:18 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:05 GMT-5
Hello Saeed,
Is the box a parallelepiped?
If so, you can simply draw a disc in a workplane that coincides with the surface of the box.
If the box has a complex shape, see my last post in this thread: www.comsol.com/community/forums/general/thread/15263
Best,
Jeff
Hello Saeed, Is the box a parallelepiped? If so, you can simply draw a disc in a workplane that coincides with the surface of the box. If the box has a complex shape, see my last post in this thread: https://www.comsol.com/community/forums/general/thread/15263 Best, Jeff
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:19 GMT-5
hi,

the box is a simple box (parallelpiped) but how can i create a workplane?
hi, the box is a simple box (parallelpiped) but how can i create a workplane?
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:22 GMT-5
You just right-click on the Geometry node and select Workplane. Same as other geometry operations, basically.
Jeff
You just right-click on the Geometry node and select Workplane. Same as other geometry operations, basically. Jeff
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:47 GMT-5
done so, and draw a circle, but i cannot see the circle when i am looking at my 3D geometry, is that the way it should be?
done so, and draw a circle, but i cannot see the circle when i am looking at my 3D geometry, is that the way it should be?
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:51 GMT-5
ok ok.... i needed to tick somewhere, now i see the circle

ok, now how i define the flux and no-flux fields so that i dont mess things up?
ok ok.... i needed to tick somewhere, now i see the circle ok, now how i define the flux and no-flux fields so that i dont mess things up?
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 12:53 GMT-5
sorry again ... did it on my own ... wow !!
sorry again ... did it on my own ... wow !!
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 13:27 GMT-5
thnx for the help, still far from completing the model so i will keep annoying people here for a while :)

regards,
saeed
thnx for the help, still far from completing the model so i will keep annoying people here for a while :) regards, saeed
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 24.02.2017, 16:31 GMT-5
Glad to hear you are making progress, Saeed.
To get acquainted with the graphical user interface, I recommend reviewing and working through the tutorials contained in the Introduction to COMSOL Multiphysics manual, version 5.2a, available here: cdn.comsol.com/documentation/5.2.1.262/IntroductionToCOMSOLMultiphysics.pdf and inside the software under File > Help > Documentation.

Best,
Jeff
Glad to hear you are making progress, Saeed. To get acquainted with the graphical user interface, I recommend reviewing and working through the tutorials contained in the Introduction to COMSOL Multiphysics manual, version 5.2a, available here: https://cdn.comsol.com/documentation/5.2.1.262/IntroductionToCOMSOLMultiphysics.pdf and inside the software under File > Help > Documentation. Best, Jeff
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 01.03.2017, 13:10 GMT-5
hi again,

how can i attach a COMSOL file? the system does not allow me to
hi again, how can i attach a COMSOL file? the system does not allow me to
Saeed Younis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 01.03.2017, 13:18 GMT-5
i saw that Jeff posted an mph file, how that can be done? the system gives me an error saying that the file extension is not legitimate
i saw that Jeff posted an mph file, how that can be done? the system gives me an error saying that the file extension is not legitimate

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content