Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
stress , strain and deformation in cantilever beam with epoxy cnt on the beam in 3d
Posted 14.03.2016, 16:15 GMT-4 MEMS & Piezoelectric Devices, Structural Mechanics Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
my cantilever beam dimensions are widht=150mm,depth=80mm,height=2.54mm .And epoxy cnt of cylindrical type with dimensions radius=35mm,height =1mm
- Im doing it in solid mechanics module,one edge is at constraint load and other as boundary load
- i wanted to apply point loads at the boundary load side and observe the deformation behaviour of cantilever beam and also observe the stress and strain behaviour of epoxy cnt composite.
HELP WITH THIS ISSUE ON HOW TO DO IT
Hello Gundavaram Chaitanya
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.