Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

hollow core photonic crystal fiber using comsol multiphysics.

Posted 16.06.2011, 01:48 GMT-4 Version 4.4 10 Replies

G.Latha -
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


dear collegues,

Iam simulating HC-PCF using comsol based on hybrid modewaves operated at free sace wavelength 1500nm in IR region. Iam unable to confine light through hollow core.
please give me a solution for which I will be grateful to you

thanks for your attention

sneha
10 Replies Last Post 16.04.2016, 12:39 GMT-4
Brian West
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.06.2011, 13:21 GMT-4

What type of simulation are you running? Eigenmodes? Frequency Domain? Time dependent?
What type of simulation are you running? Eigenmodes? Frequency Domain? Time dependent?
G.Latha -
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 04.07.2011, 12:17 GMT-4
Thank you for immediate response.
sir, actually iam running my file eigenmodes. here with iam attaching drawing and specifications of my pcf
please give a solution.

sincerely,
latha.g
Thank you for immediate response. sir, actually iam running my file eigenmodes. here with iam attaching drawing and specifications of my pcf please give a solution. sincerely, latha.g
Xuan Yang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17.08.2011, 17:36 GMT-4
Hi,

Did you figure it out? I had a similar issue. If you've known the solution, please help me!

Best,

Leo
Hi, Did you figure it out? I had a similar issue. If you've known the solution, please help me! Best, Leo
Brian West
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.08.2011, 15:54 GMT-4

Sorry, I've been off of COMSOL with license server issues for several weeks.

If you can send me the .mph I will have a look at it.
Sorry, I've been off of COMSOL with license server issues for several weeks. If you can send me the .mph I will have a look at it.
Xuan Yang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.08.2011, 17:20 GMT-4
Hi,

Here is the .mph file. I also attached the reference. Thanks!

Best,

Leo
Hi, Here is the .mph file. I also attached the reference. Thanks! Best, Leo
Brian West
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.08.2011, 18:21 GMT-4

What sort of problem did you encounter when running the simulation?
What sort of problem did you encounter when running the simulation?
Xuan Yang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.08.2011, 18:25 GMT-4
When I try the mode analysis, it shows error. And when I tried the eigen value study, I cannot find the confined mode. Thanks!
When I try the mode analysis, it shows error. And when I tried the eigen value study, I cannot find the confined mode. Thanks!
G.Latha -
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16.05.2013, 12:54 GMT-4
SIR ,
sorry for the late reply. Actually I have simulated my sold core pcf long back using old comsol version.I hope you might have forgotten the request i sent very long back. sir, here with I have attached my pcf.mph for your notice.

Thank you
SIR , sorry for the late reply. Actually I have simulated my sold core pcf long back using old comsol version.I hope you might have forgotten the request i sent very long back. sir, here with I have attached my pcf.mph for your notice. Thank you

Attachments:

Pennapa Khamdee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 10.04.2016, 16:20 GMT-4
Would u mind sharing that correct file again??
I can't open it. Your file will help me a lot for my thesis.
Pls help me
Version 4.4 and 5.1
Thanks
Would u mind sharing that correct file again?? I can't open it. Your file will help me a lot for my thesis. Pls help me Version 4.4 and 5.1 Thanks
Nafiz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 16.04.2016, 12:39 GMT-4

When I try the mode analysis, it shows error. And when I tried the eigen value study, I cannot find the confined mode. Thanks!



@G. Latha

Do you remember how you got around this problem ? I dont find the confined modes too.
[QUOTE] When I try the mode analysis, it shows error. And when I tried the eigen value study, I cannot find the confined mode. Thanks! [/QUOTE] @G. Latha Do you remember how you got around this problem ? I dont find the confined modes too.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content